Actually, let’s see: Partner Plus, so the first slot with a 206 is extensions 10 through 15; second slot with 206 is 16 through 21; third slot is the processor, fourth slot is the voice mail, that slot is extensions 22 through 27.
Since it’s a VS mail, it uses the last 2 or 4 extensions, depending on the port/mailbox card inserted, and Hofer says it’s a 2-port. So, the extensions to put into Hunt Group 7 are 26 and 27.
FEATURE 00
Left INTERCOM twice
#505 – 7 – 26 – 1
#505 – 7 – 27 – 1
#306 – 26 – 10 (transfer return calls go to Ext. 10)
#306 – 27 – 10
FEATURE 00
If you have already been programming and might have other extensions in Group 7, be sure to take anything other than 26 and 27 OUT.
#505 – 7 – XX – 2 (where XX is the extension No.)
Reset to factory default Settings
Go into the VM system – “int 777” at the voice menu enter 99# for Admin functions and the default password is – 2537. Then press 9 and you are into the main VM programming menu system. At any time just press 98925327. You will hear the voice prompt telling you “the system will now be reset to factory default settings – goodbye”. That is per drewmich. There is a code to reset the whole switch, but I can’t remember it. I really don’t think you would want to do that tho…